Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

当归挥发性有机物的SPME/GC-MS分析

采用不同极性的SPME萃取吸附了当归的挥发性有机物,并用GC-MS定性和相对定量,比较了不同萃取时间和不同萃取温度下所获得的挥发性有机物的差异。结果表明:藁本内酯和α-蒎烯是其主要成分。随着萃取时间的延长,α-蒎烯含量逐渐减少,藁本内酯含量逐渐升高;随着萃取温度的升高,低沸点化合物含量逐渐减少,高沸点化合物含量逐渐增加。     

Fe3+掺杂TiO2光催化降解聚乙烯薄膜的研究

以快速溶胶-凝胶法制备了纳米TiO₂光催化剂，并用Fe³⁺对其掺杂改性，在室温条件下, 用于固相光催化降解聚乙烯(PE)包装薄膜的研究. 对催化剂和薄膜进行了X衍射分析(XRD)、傅立叶红外光谱分析(FT-IR)、扫描电子显微镜(SEM)形貌观察. 结果表明， 60 W紫外光辐射240 h后， PE失重为8.43%, 锐钛矿型纳米TiO₂光催化剂使PE失重30.66%；用Fe³⁺掺杂后，0.5%Fe₂O3/TiO₂、1.0%Fe₂O₃/TiO₂和2.0%Fe₂O3/TiO₂分别使PE失重35.91%、20.72%和13.30%. 光催化剂加速了PE的失重，碳链的断裂和光氧化腐蚀，在薄膜表面形成大量的坑洞，降解产物中的小分子量的石蜡含量明显增高. Fe³⁺掺杂有一个最佳量， 0.5%Fe₂O3/TiO₂光催化降解PE的活性最高.     

液-液-液微萃取-高效液相色谱法测定人血浆中的局部麻醉剂

建立了液-液-液微萃取与高效液相色谱联用技术同时测定人血浆中3种局部麻醉剂利多卡因、布比卡因和丁卡因的方法。考察了萃取时间、料液pH值和搅拌速度的影响,取佳萃取条件为萃取溶剂为200μL苯,接受相为1.0μL 0.2 mol/L HC l,搅拌速度为250 r/m in,萃取时间为45 m in。在该条件下,获得了高的富集因子(大于305倍)。方法的线性范围为:利多卡因和布比卡因0.025~5 mg/L,丁卡因0.05~5 mg/L,相关系数大于0.996;检出限依次为0.005、0.015和0.025 mg/L;相对标准偏差小于5%。该方法能有效地去除血浆中复杂基体的干扰,萃取效率高,有机溶剂消耗少,是一种有效、灵敏的同时测定血浆中利多卡因、布比卡因和丁卡因的方法。     

反相高效液相色谱法测定全血中马钱子碱和士的宁的含量

 建立了反相高效液相色谱法定量分析全血中马钱子碱和士的宁含量的方法。该方法应用Oasis  R ○ MCX固相萃取小柱进行提取、采用XTerra TM RP 18 色谱柱进行分离。在该条件下马钱子碱和士的宁的线性范围为0.05～10 mg/L ,最小检出限为0.15 ng。该方法测得马钱子碱和士的宁在低、中、高浓度下的回收率均在90%以上,日内、日间精密度均符合方法学要求。该方法灵敏、快速、准确,适用于临床血药浓度监测和法医毒化检验。     

Modification of Surface and Structural Properties of Ordered Mesoporous Silicates

Two simple modification methods for ordered mesoporous silicas were examined and compared. MCM-41 molecular sieve was physically coated with 4-cyano-4-biphenyl [4(4-pentenyloxy)]benzoate (CBPB) and chemically modified using trimethylethoxysilane. The structural and surface properties of the obtained materials were characterized using elemental analysis, thermogravimetry and nitrogen adsorption over a wide pressure range.It was shown that the pore size of the MCM-41 material was not decreased significantly after the coating procedure, even for high loadings of CBPB. Moreover, low pressure adsorption measurements indicated that significant fractions of the MCM-41 surface were not covered by CBPB, even for high CBPB loadings, which suggests that the attained coverage may be very nonuniform. The chemical bonding procedure led to a marked decrease in the pore size and change of surface properties.It was demonstrated that nitrogen adsorption measurements provide a means of a thorough characterization of modified MCM-41 materials, allowing to estimate the surface area, pore volume and pore size distribution. Moreover, low pressure adsorption data can be used to qualitatively or semiquantitatively assess the surface coverage of the coated/bonded organic groups, which may be used to estimate the uniformity of the coverage and therefore, the usefulness of the modification procedure.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

水中酚类化合物的液-液-液微萃取/ 高效液相色谱联用分析研究

建立了液-液-液微萃取/高效液相色谱联用(LLLME/HPLC)测定环境水中痕量酚类化合物2-甲基苯酚、2-硝基苯酚、2,4-二氯苯酚的分析方法,研究了有机相溶剂种类及其体积、料液相pH值与离子强度、接受相的体积、组成及浓度和搅拌速率、萃取时间等因素对分析物萃取效率的影响。实验结果表明,该方法对酚类化合物的富集倍数可达到404~747倍,方法的线性范围为0.2~300μg/L,RSD(n=6)为6.8%~11.4%。测定加标自来水、江水以及生活污水样品的回收率为83%~110%。